Length |
648 mm (25.5 in.)
|
Width |
259 mm (10.2 in.)
|
Height |
254 mm (10 in.), 427 mm (16.8 in.) with bracket
|
Weight |
7.7 kg (17 lbs)
|
Electronic dimming |
0 - 100%, four dimming curve options
|
Strobe and pulse effects |
Variable speed and action, random strobe
|
Electronic shutter effect |
Instant open and blackout
|
DMX channels |
1/2/4
|
16-bit control |
Intensity
|
Control options |
DMX, stand-alone
|
Setting and addressing |
Control panel with OLED display or via RDM
|
Standalone programming |
Control panel with OLED display
|
DMX compliance |
USITT DMX512-A
|
RDM compliance |
ANSI/ESTA E1.20
|
Transceiver |
Opto-isolated RS-485
|
Light source |
91 X 3W warm white LEDs
|
Color temperature |
3000K
|
Lens tube options |
19°, 26°, 36°, 50°
|
Minimum LED lifetime |
30,000 hours (to >70% luminous output)*
|
Optics notes |
*Figure obtained under manufacturer's test conditions
|
Color |
Black or white variant
|
Housing |
Die-cast aluminum
|
Protection rating |
IP20
|
Gobo size |
A size, 100 mm OD, 75 mm image*, B size, 86 mm OD, 64.5 mm image*
|
Color frame size |
159 X 159 mm (6.25 X 6.25 in.)
|
Gobos and Color Frame notes |
*Gobo holder not included
|
Mounting |
Adjustable bracket
|
Location |
Indoor use only
|
Orientation |
Any
|
Minimum distance to combustible materials |
0.2 m (0.7 ft.)
|
Minimum distance to illuminated surfaces |
0.5 m (1.6 ft.)
|
AC power in, thru |
Neutrik PowerCON TRUE1
|
DMX and RDM data in/out |
5-pin locking XLR
|
AC power |
100-240 V nominal, 50/60 Hz
|
Power supply unit |
Auto-ranging electronic switch-mode
|
Idle power (zero intensity) |
5 W
|
Half-cycle RMS inrush current at 230 V, 50 Hz |
15.3 A
|
Fixture link via PowerCON at 100-120 V |
Up to 4 fixtures
|
Fixture link via PowerCON at 200-240 V |
Up to 9 fixtures
|
Electrical notes |
Power consumption figures are typical, not maximum. Allow for +/- 10% variation.
|
110 V, 60 Hz |
2.6 A, 280 W, PF 0.99
|
208 V, 60 Hz |
1.4 A, 270 W, PF 0.97
|
230 V, 50 Hz |
1.2 A, 269 W, PF 0.96
|
240 V, 50 Hz |
1.2 A, 268 W, PF 0.96
|
Typical Power and Current notes |
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
|
Cooling |
Forced air (temperature-regulated, low noise)
|
Maximum ambient temperature (Ta max.) |
40° C (104° F)
|
Minimum ambient temperature (Ta min.) |
0° C (32° F)
|
Total heat dissipation (calculated, +/- 10%) |
1000 BTU/hr. (at full intensity, full white)
|
EU safety |
EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
|
EU EMC |
EN 55015; EN 55032; EN 55103-2; EN 61000-3-2,-3; EN 61547
|
US safety |
UL 1573
|
US EMC |
FCC Part 15 Class B
|
Canadian safety |
CSA C22.2 No. 166
|
Canadian EMC |
ICES-003 Class B, ICES-005 Class B
|
Australia/NZ |
RCM
|
Included Items notes |
Power input cable (0.75mm2, 18 AWG), bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.) Mounting bracket User manual
|
Cables, 16 A, for connection to power in chains |
Power input cables Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797 Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786 Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173 Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174 Power relay cables Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1 0.45 m (1.5 ft.): P/N 91611784 Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1 1.2 m (3.9 ft.): P/N 91611785 Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1 2.5 m (8.2 ft.): P/N 91611786 Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91610170 Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91610171 Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 2.5 m (8.2 ft.): P/N 91610172
|
Connectors |
Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789 Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788
|
Martin™ RDM 5.5 Splitter |
P/N 90758150
|
Martin Companion Cable |
P/N 91616091
|
Martin ELP WW (Body Only) |
P/N 9045107781
|
Martin ELP WW (Body Only), White |
P/N 9045115165
|
Martin ELP Lens Tube 19° |
P/N 9045107782
|
Martin ELP Lens Tube 26° |
P/N 9045107783
|
Martin ELP Lens Tube 36° |
P/N 9045107784
|
Martin ELP Lens Tube 50° |
P/N 9045107785
|
Martin ELP Lens Tube 19° White |
P/N 9045115166
|
Martin ELP Lens Tube 26° White |
P/N 9045115167
|
Martin ELP Lens Tube 36° White |
P/N 9045115168
|
Martin ELP Lens Tube 50° White |
P/N 9045115170
|
Light engine luminous output |
16,000 lumen
|
Fixture luminous output |
7000 lumen
|
CRI (Color Rendering Index) |
>97
|
CQS (Color Quality Scale) |
>93
|
TM-30 Rf (IES TM-30-15 Fidelity Index) |
>93
|
TM-30 Rg (IES TM-30-15 Gamut Index) |
>101
|
TLCI (Television Lighting Consistency Index) |
>96
|
Installation hardware |
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003 Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007 Half-coupler clamp: P/N 91602005 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
|
PWM |
600-2400 Hz
|