ÜRÜNLER
ERA 150 Wash
- Marka : MARTIN
- Ürün Kodu : ERA 150 WASH
ERA 150 Yıkama
Yakınlaştırmalı hareketli kafalı LED yıkama armatürü
Martin ERA 150 Wash hareketli kafalı LED yıkama armatürü, doğru renk üretimi ve renk sıcaklığı kontrolü için sınıfında lider lümen çıkışı, yüksek yoğunluklu dar yakınlaştırma ve tam gamlı renk kalibrasyonu sağlayarak, onu kiralama, kurulum ve tur için inanılmaz derecede çok yönlü ancak uygun fiyatlı bir iş atı aydınlatma çözümü haline getiriyor.
ERA 150 Wash, daha geniş yakınlaştırma aralığı, daha yüksek çıktı ve geniş, eşit yıkama alanı üreten yeni tasarlanmış optik sistem sayesinde performansı daha da ileri taşıyor. Diğer gelişmeler arasında, genişletilmiş renk modu ve RGB renginin istediğiniz beyaz nokta etrafında karıştırılmasına olanak tanıyan bir CTC kanalı da dahil olmak üzere gelişmiş renk kalibrasyon özellikleri yer alıyor.
Bir tiyatro prodüksiyonunu, canlı konseri, sergiyi veya kurumsal etkinliği aydınlatıyor olun, tasarımcıların alet çantasına yeni çok yönlülük getiren bu esnek hareketli kafalı armatürle sahneyi renklerle doldurun ve parlak, odaklanmış ışın efektleri yaratın.
Özellikler
- Işık motoru: LED 7 x 40W RGBW
- Tam gamlı renk kalibrasyonu
- CTC kontrolü: 1.800-12.850 K
- Yüksek çıkış: 3.900 lm
- Yüksek yoğunluklu 397.783 cd
- Yakınlaştırma: 4,2 - 58?
- Düşük gürültülü soğutma sistemi
- Yüksek hızlı kaydırma, eğme ve yakınlaştırma
- Ağırlık 7,3 kg (16,1 lb.)
- Boyutlar: 276 x 176 x 356 mm (10,9 x 7,0 x 14,1 inç)
| Physical | |
| Length | 276 mm (10.9 in.) |
| Width | 176 mm (7.0 in.) |
| Height | 356 mm (14.1 in.) |
| Weight | 7.3 kg (16.1 lbs.) |
| Dynamic Effects | |
| Color mixing | RGBW |
| Color presets | 48 color presets, virtual color wheel effects |
| Zoom | Motorized: 4.2 - 58° |
| Color temperature control | Variable 1,800 - 12,850 K |
| Electronic dimming | 0 - 100%, four dimming curve options |
| Strobe and pulse effects | Variable speed and action, random strobe |
| Electronic shutter effect | Instant open and blackout |
| Pan | 540° |
| Tilt | 260° |
| Control and Programming | |
| Control options | DMX, RDM |
| 16-bit fine control | Dimming, RGB, zoom, pan and tilt |
| LED color management modes | Raw, extended and calibrated |
| DMX address setting | Control panel with LCD display |
| DMX channels | 18 |
| DMX compliance | USITT DMX512-A |
| RDM compliance | ANSI/ESTA E1.20 |
| Fixture software update | USB memory device or over DMX link |
| Optics | |
| Light source | 7 x 40 W RGBW Osram LEDs |
| Minimum LED lifetime | 50,000 hours (to >70% luminous output)* |
| Beam angle (half-peak) | 4.2° - 38.7° |
| Field angle (one-tenth peak) | 5.1° - 58.6° |
| Cutoff angle (3%) | 5.7° - 69.6° |
| Binning | Tight color and flux binning |
| Calibration | Full Gamut Color Calibration*Figure obtained under manufacturer's test conditions |
| Photometric Data | |
| Wide beam | 3900 lumens |
| Narrow beam | 1774 lumens |
| Fixture Center Intensity Narrow Beam | 397783 cd |
| Fixture Center Intensity Wide beam | 10042 cd |
| CRI (Color Rendering Index) | >70 |
| CQS (Color Quality Scale) | 83 |
| TM-30 Rf (IES TM-30-15 Fidelity Index) | 77 |
| TM-30 Rg (IES TM-30-15 Gamut Index) | 117 |
| TLCI (Television Lighting Consistency Index) | 56 |
| CCT | 6500 Kelvin |
| LED refresh rate - Standard Mode | 3600 Hz |
| LED refresh rate - Theatre Mode | 19200 Hz |
| * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient. | |
| Construction | |
| Housing | High-impact flame-retardant thermoplastic |
| Color | Black |
| Protection rating | IP 20 |
| Installation | |
| Mounting points | 2 x quarter?turn fastener receptacles, 106.5 mm |
| Location | Indoor use only, must be fastened to surface or structure |
| Orientation | Any |
| Minimum distance to combustible materials | 0.5 m (1.7 ft.) |
| Minimum distance to illuminated surfaces | 1 m (3.3 ft.) |
| Minimum clearance around fan and air vents | 0.5 m (1.7 ft.) |
| Connections | |
| AC power input/output | Neutrik PowerCON TRUE1 TOP |
| DMX and RDM data in/out | Neutrik 5-pin locking XLR |
| Electrical | |
| AC power | 100-240 V AC nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeTypical half-cycle RMS inrush current at 240 V, 50 Hz: 8.7 APower Factor: 0.99 @ 100 V / 120 V , 0.97 @ 220 V / 230 V / 240 VTypical current draw: 3.8 A @ 100 V / 120 V , 1.5 A @ 220 V / 230 V / 240 V * Power ConsumptionTypical: 315 W *Hibernation: 5 W * * Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Typical: full output white, no effects moving, regulated fan speed. Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture. |
| Thermal | |
| Cooling | Forced air (temperature regulated, low noise) |
| Total heat dissipation (calculated) | 1195 BTU/hr.*Calculated, +/- 10%, at full intensity, full white |
| Maximum ambient temperature (Ta max.) | 40° C (104° F) |
| Minimum ambient temperature (Ta min.) | -10° C (14° F) |
| Acoustic Data | |
| Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output) | 37.0 dB(A) |
| Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low) | 34.3 dB(A) |
| Environmental | |
| RoHS | Compliant |
| REACH | Compliant |
| WEEE | Compliant |
| Proposition 65 | Compliant |
| Efficacy (max output) | 15.5 lm/W |
| LWR* | 507 lm/kg (230 lm/lb) |
| LWR = Lumen-to-Weight Ratio | |
| Approvals | |
| Global CB Certification/IECEE | IEC 60598-2-17 (IEC 60598-1) |
| EU safety | EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 |
| EU EMC | EN 55015; EN 55032; EN 55035; EN 61000-3-2, EN 61000-3-3, EN 61547 |
| US safety | UL 1573 |
| US EMC | FCC Part 15 Class B |
| Canadian safety | CSA C22.2 No. 166 |
| Canadian EMC | ICES-003 Class B, ICES-005 Class B |
| Australia/NZ | RCM |
| United Kingdom | UKCA |
| Included Items | |
| Safety and Installation Manual | |
| Martin Omega bracket for rigging clamp attachment | P/N 91602001 |
| Related Items | |
| Martin Companion Cable (for firmware update over DMX) | P/N 91616091 |
| Martin Companion Software (for firmware update over DMX) | Free download from www.martin.com |
| Accessories | |
| Power Input CablesPower Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91611786Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91610174 Power Linking CablesPower relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 0.45 m (1.5 ft.) | P/N 91611784Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172 Power ConnectorsPower Connector, Cable Mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789HUPower Connector, Cable Mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788HU Installation HardwareG-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007Half-coupler Clamp: P/N 91602005Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007 |
| Ordering Information | |
| ERA 150 Wash in cardboard box | P/N MAR-90290000 |
| ERA 150 Wash - White in cardboard box | P/N MAR-90290005 |