| Length |
314 mm (12.4 in.)
|
| Width |
68 mm (2.7 in.)
|
| Height |
39 mm (1.5 in.)
|
| Weight |
1.5 kg (3.3 lbs.)
|
| System integration notes |
Exterior PixLine™ family
Exterior Dot-HPTM family
VDO Sceptron™ family
VC-Dot™ family via VC-Feeder™
VC-Grid™ family (indoor product)
VC-Strip™ family (indoor product)
Tripix family
|
| Housing |
Aluminum
|
| Finish |
Clear anodized
|
| Protection rating |
IP66, NEMA 4X
|
| Construction notes |
RoHS compliant
|
| Mounting |
Fixation points for surface-mounting
|
| Orientation |
Any
|
| Maximum cable length |
See connected product user manuals
|
| Maximum number of connected fixtures |
See connected product user manuals
|
| AC mains power input |
Hard-wired (terminal block) via cable gland
|
| 48 VDC power output |
To Tripix: Power Inserter Cable, Martin™ IP66 PSU 240 W to Tripix system, 0.25 m (9.8 in.), P/N 91611339
To VDO Sceptron: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
To Exterior PixLine: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
To Exterior Dot-HP: Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
To VC-Grid: Input Y-Cable, XLR5 + Martin™ IP66 PSU to XLR4, 0.25 m (9.8 in.), P/N 91616039
To VC-Strip: Input Y-Cable, XLR5 + Martin™ IP66 PSU to XLR4, 0.25 m (9.8 in.), P/N 91616039
To VC-Feeder (VC-Dot): Input Y-Cable, XLR5 + Martin™ IP66 PSU 240W to IP65 connector, 0.25 m (9.8 in.), P/N 11840195
|
| Connections notes |
See user manuals of compatible products for latest complete information on suitable cables and connectors, safety limits, etc.
|
| AC power input |
100-240 V nominal, 50/60 Hz
|
| Power supply unit |
Auto-sensing multi-voltage switch-mode
|
| DC power output |
48 V
|
| Maximum DC output power |
240 W
|
| Maximum DC output current draw |
5 A
|
| Protection |
Overvoltage, overcurrent, short circuit, over-temperature, all with auto-recovery
|
| Cooling |
Convection
|
| Maximum ambient temperature (Ta max.) |
45° C (113° F)
|
| Minimum ambient temperature (Ta min.) |
-30° C (-22° F)
|
| Maximum surface temperature, steady state, at 45° C ambient |
80° C (176° F)
|
| Total heat dissipation (calculated, including max. number of connected devices, all at full load) |
820 BTU/hr.
|
| EU safety |
EN 60598-2-6, EN 61347-2-13
|
| EU EMC |
EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547
|
| US safety |
UL 1012
|
| Canadian safety |
CSA C22.2 No. 107.1
|
| Australia/NZ |
RCM
|
| Power Inserter Cable, Martin™ IP66 PSU 240 W to Tripix™ system |
P/N 91611339
|
| Input Y-Cable, 5-pin XLR + Martin™ IP66 PSU 240W to BBD, 0.25m (9.8 in.) |
P/N 91616050
|
| Input Y-Cable, 5-pin male XLR + Martin™ IP66 PSU 240W to 4-pin fem. XLR, 0.25 m (9.8 in.) |
P/N 91616039
|
| Input Y-Cable, 5-pin male XLR + Martin™ IP66 PSU 240W to IP65, 0.25 m (9.8 in.) |
P/N 11840195
|
| Martin™ IP66 PSU 240 W (replaces Tripix™ Power IP66) |
P/N 90760330
|