Ertekin World of Sound

kapat

Dimmer ve Splitterler

Markalar

Güç Kaynağı

Protokol

Ölçüler

Cihaz yüksekliği

Ağırlık

Giriş Kanal Sayısı

Çıkış Kanal Sayısı

Kanal Sayısı

Kanal Başına Çıkış

Dahili Aksesuarlar

Dimmer ve Splitterler

Avolites
ART-2000 48 KANAL

48 channels at 16 amps per channel
Channels can be specified as dimmable, manual switch or contactor
Excellent noise suppression with 250uS chokes
100% duty cycle
Single Pole and Neutral Disconnect breakers are available
C-type breakers allow for High inrush
Three Phase and Single Phase operation (requires option)
Individual faders for each channel for use as channel test, scene setting or for controlling the twelve on-board memories
Two isolated DMX inputs with DMX merge
Full softpatch in module - any dimmer channel to any DMX channel on both lines
Large back-lit LCD display showing patching, dimmer levels and status
No sub menus - 15 buttons each with dedicated function
Internal memories for stand-alone operation, each with master fader
Link facility to allow module faders to become memory masters for the entire rack or system
16 dimming response curves
Output voltage limit from 1% to 100%
Mains frequency tracking
Input power on Powerloc, Camlock single pole connectors, or CeeNorm P17, other possibilities to special order
Analog Voltage metering standard or Digital Voltage metering (option)
Optional loop out power connectors
Analog Current metering standard or Digital Current metering (option)
RCB protection on all circuits or optional ELDC selectable earth leakage protection
Wielands ST17 patch panel with 120 socket or ST18 patch connector with 96 sockets
Patch panel has switchable patch light and a battery operated lamp test socket
Choice of multipin output panels with Socapex 19 pin, Harting or Cee16 direct out connectors
Localized custom wiring for the multipin outlet connectors to suit local markets

Dimmer ve Splitterler

Avolites
POWERCUBE

Dimmer and distribution channels- 10A C type ABB breakers
Distribution channels 16A C type ABB breakers (5-10x I nominal inrush current).
Captive Mains tail of 1.2m H07R 5x 10mm2 fitted with a 63A 5 pin Cee connector.
Flight-case and dimmer provide for easy storage of this cable
Mains supplies either 63A 3phase+N TN-S or 63A single Phase +N.
Mains inlet breaker 63A D type ABB breakers (10-15x I nominal inrush current).
Three individual single phase 63A 30mA residual current breakers to protect operators. Each RCB protects one phase, therefore increasing the selectivity of the RCB protection. (BS7909 requirement).
Mains breaker is a four pole unit that also protects the Neutral wire which is important in case of single phase operation.
Socapex or Harting output connectors available