Ertekin World of Sound

Audio-Technica

ATW-A49

Geniş Band Kablosuz Sistem Anteni

Marka:	Audio-Technica
Ürün Kodu:	ATW-A49
Kategori:	Mikrofonlar
Barkod:	042005133154

TEKNİK ÖZELLİKLER
DETAYLAR
DÖKÜMANLAR

ÖZELLİKLER

TEKNİK ÖZELLİKLER

Empedans	50 Ohm
Frekans Cevabı 1	440 Hz - 900 MHz

DETAYLAR

Audio Technica UHF Wide-Band Directional LPDA Anten

DÖKÜMANLAR

RESİMLER

ETİKETLER

ÜRÜN AİLESİ

AT8458

AT8483

AT8657LED

AT8662

ATW-B80C

CMA350

CMX Mikrofonlar İçin Shock Mounth

AT8656LED

Kaz Boynu Boundry Mikrofon

AT8666RSP

Masaüstü Mikrofon Standı

ATND8677

Dante Özellikli Masaüstü Set

ATW-DA49EU

Anten Distribütör Sistemi

MIKROFON SÜNGERI

CMP401

Condenser Mikrofonlar İçin Phantom Ünitesi

MWS05

Mikrofon Aksesuarları

MWS200

Mikrofon Aksesuarları

MWS215

Mikrofon Aksesuarları

MWS220

Mikrofon Aksesuarları

MWS700/B

CMX700/705/720/725 İçin Sünger

MWS700/S

CMX700/705/720/725 İçin Sünger

MWS800/B

Mikrofon Aksesuarları

MWS800/S

Mikrofon Aksesuarları

HT-48V2

+48V Phantom Ünitesi

AT8615

Masaüstü Mikrofon Standı

STS DAM +

Profesyonel Masaüstü Mikrofon Standı

ST6

3 Pinli Mikrofonlar için Profesyonel Masaüstü Mikrofon Standı

ST45

Düşük Profilli Masaüstü Stand

H85

Kondenser Mikrofonlar İçin Shock Mount

CK31

Kazboynu Mikrofonlar İçinKardioid Kapsül

MK HS MINIJACK

Headset cable for PC, conferencing. Detachable cable with a 6-pin mini XLR connector on one end that connects to AKG HSC/HSD headsets, and two 3.5mm (1/8") stereo mini jacks on the other end. Cable length: 3m (9.8 in.). Mic Mute is not supported by this cable.

MK HS STUDIO C

Headset cable for studio, moderators, commentators (three-pin XLR male). Detachable cable with a 6-pin mini XLR connector on one end that connects to AKG HSC Headsets, and a 6.3mm (1/4") stereo jack and three-pin XLR male on the other end. Phantom powering 9-52V required. Cable length: 1.8 to 2.5 m (5.9 to 8.2 ft.).

MK HS STUDIO D

Headset cable for studio, moderators, commentators (three-pin XLR male). Detachable cable with a 6-pin mini XLR connector on one end that connects to AKG HSD Headsets, and a 6.3mm (1/4") stereo jack and three-pin XLR male on the other end. No phantom powering required. Cable length: 1.8 to 2.5 m (5.9 to 8.2 ft.).

MK HS XLR 4D

Headset cable for intercom / broadcasting. Detachable cable with a 6-pin mini XLR connector on one end that connects to AKG HSD headsets, and a 4-pin XLR connector (female) on the other end. Cable length: 1.6 to 2.3m (5.2 to 7.5 ft.).

MK HS XLR 5D

Headset cable for cameras / intercom. Detachable cable with a 6-pin mini XLR connector on one end that connects to AKG HSD headsets, and a 5pin XLR connector (male) on the other end. Cable length: 1.6 to 2.3 m (5.2 to 7.5 ft.).

H1 MAGNET CLIP BLACK 5 PACK

The H1 magnet clip is part of the MicroLite series and holds the microphone housing, instead of the delicate cable to ensure a tight hold as well as protecting the cable from breaking.

H1 MAGNET CLIP WHITE 5 PACK

The H1 magnet clip is part of the MicroLite series and holds the microphone housing, instead of the delicate cable to ensure a tight hold as well as protecting the cable from breaking.

STS DAM+ WL

The STS DAM+ WL is based on a heavy duty tabletop mechanical design and is compatible with the AKG DAM+ series of goosenecks and capsules. Due to its heavy weight and 'clever rubber' feet it absorbs shock well and keeps the microphone firmly in place. When fitted with one of the compatible AKG pocket transmitters you have a complete wireless conferencing solution.

CK80

The CK80 high-performance shotgun microphone capsule provides an 80° pickup angle and offers a speech-optimized frequency response. It offers an unbeatable price/performance ratio and good speech intelligibility in acoustically critical applications.

H500

The AKG H 500 shock mount is designed for permanent installation of E and ES version gooseneck modules from the Discreet Acoustics Modular (DAM) series.

H600

The AKG H 600 shock mount is designed for permanent installation of E and ES version gooseneck modules from the Discreet Acoustics Modular series. This mount provides maximum attenuation of structure-borne noise (20 dB).

MF M

The MF M is a flush-mount module that efficiently reduces body noise from tables. Its slim design can integrate each powering module (PAE M or PAE5 M) of the Modular Plus Series and allows the microphones to be detached when not in use.

W30

Windscreen for use with CK31, CK32 and CK33

MPA V L

Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch - 9 to 52 Volts.

SA60

Use AKG's SA60 Stand Adapter for Straight Shaft Mics to hold small or medium condensers and straight-bodied dynamics firmly on your stand.

SA63

Stand adapter for use with wireless microphone systems handheld transmitters. Fits large-shaft mics, including C1000 S, HT470, HT45. HT4500, and HT40 Mini.