MENÜ

Dimmer ve Splitterler
 

Avolites
POWERCUBE
  • Dimmer and distribution channels- 10A C type ABB breakers
  • Distribution channels 16A C type ABB breakers (5-10x I nominal inrush current).
  • Captive Mains tail of 1.2m H07R 5x 10mm2 fitted with a 63A 5 pin Cee connector.
  • Flight-case and dimmer provide for easy storage of this cable
  • Mains supplies either 63A 3phase+N TN-S or 63A single Phase +N.
  • Mains inlet breaker 63A D type ABB breakers (10-15x I nominal inrush current).
  • Three individual single phase 63A 30mA residual current breakers to protect operators. Each RCB protects one phase, therefore increasing the selectivity of the RCB protection. (BS7909 requirement).
  • Mains breaker is a four pole unit that also protects the Neutral wire which is important in case of single phase operation.
  • Socapex or Harting output connectors available

Dimmer ve Splitterler
 

Avolites
ART-2000 48 KANAL
 
  • 48 channels at 16 amps per channel
  • Channels can be specified as dimmable, manual switch or contactor
  • Excellent noise suppression with 250uS chokes
  • 100% duty cycle
  • Single Pole and Neutral Disconnect breakers are available
  • C-type breakers allow for High inrush
  • Three Phase and Single Phase operation (requires option)
  • Individual faders for each channel for use as channel test, scene setting or for controlling the twelve on-board memories
  • Two isolated DMX inputs with DMX merge
  • Full softpatch in module - any dimmer channel to any DMX channel on both lines
  • Large back-lit LCD display showing patching, dimmer levels and status
  • No sub menus - 15 buttons each with dedicated function
  • Internal memories for stand-alone operation, each with master fader
  • Link facility to allow module faders to become memory masters for the entire rack or system
  • 16 dimming response curves
  • Output voltage limit from 1% to 100%
  • Mains frequency tracking
  • Input power on Powerloc, Camlock single pole connectors, or CeeNorm P17, other possibilities to special order
  • Analog Voltage metering standard or  Digital Voltage metering (option)
  • Optional loop out power connectors
  • Analog Current  metering standard or  Digital Current  metering (option)
  • RCB protection on all circuits or optional ELDC selectable earth leakage protection
  • Wielands ST17 patch panel with 120 socket or ST18 patch connector with 96 sockets
  • Patch panel has switchable patch light and a battery operated lamp test socket 
  • Choice of multipin output panels with Socapex 19 pin, Harting or Cee16 direct out connectors
  • Localized custom wiring for the multipin outlet connectors to suit local markets

 

 



1